$ sudo fastboot oem logdump
(bootloader) Dumping Boot Logs:
(bootloader) ==============================
(bootloader) [       1] I - welcome to lk
(bootloader) [       1] I - INIT: cpu 0, calling hook 0xff07cf0c 
(bootloader) (version) at level 0x3ffff, flags 0x1
(bootloader) [       1] I - version:
(bootloader) [       1] I -     arch:     ARM64
(bootloader) [       1] I -     platform: MAESTRO9610
(bootloader) [       1] I -     target:   MAESTRO9610
(bootloader) [       1] I -     project:  MAESTRO9610
(bootloader) [       1] I -     buildid:  FALSE
(bootloader) [       1] I - bootloader partition start block(512 Byte): 
(bootloader) 1525872
(bootloader) [       3] I - s2mu106_charger_set_charger_mode: 
(bootloader) S2MU106_CHG_CTRL0 = 0x03
(bootloader) [       3] I - s2mu106_charger_reg_init, 0xec(35)
(bootloader) [       4] I - s2mu106_charger_reg_init, 0xe5(8)
(bootloader) [       5] I - s2mu106_charger_reg_init, 0x3D(55)
(bootloader) [       5] I - s2mu106_charger_reg_init, CTRL4(d)
(bootloader) [       6] I - power reset reg: 0x00010000, cnt = 0
(bootloader) [       6] I - Reboot reason: 0x00000000
(bootloader) [       6] I - mpu09 INT1 reg: 0x43
(bootloader) [       6] I - mpu09 INT2 reg: 0x14
(bootloader) [       6] I - mpu09 PWRONSRC reg: 0x01
(bootloader) [       6] I - mpu09 OFFSRC reg: 0x10
(bootloader) [       7] I - mu106 device type reg: 0x04
(bootloader) [       7] I - hard reset
(bootloader) [      20] I - Secure Payload is loaded successfully!
(bootloader) [      20] I - gpg1_dat: 33 / board_id: 1
(bootloader) [      20] I - Enable UFS IO cache coherency
(bootloader) [      57] I - Use 1 lane connection
(bootloader) [      58] I - Power mode change: M(1)G(3)L(1)HS-series(2)
(bootloader) [      59] I - [SCSI] LU0  SAMSUNG KLUDG4U1EA-B0C1 0800
(bootloader) [      59] I - [SCSI] ufs block count: 31240191
(bootloader) [      59] I - [SCSI] LU1  SAMSUNG KLUDG4U1EA-B0C1 0800
(bootloader) [      59] I - [SCSI] ufs block count: 1023
(bootloader) [      59] I - [SCSI] LU2  SAMSUNG KLUDG4U1EA-B0C1 0800
(bootloader) [      59] I - [SCSI] ufs block count: 1023
(bootloader) [      59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
(bootloader) [      59] I - SCSI Response(01) : 
(bootloader) [      59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 
(bootloader) 00 00 25 00 00 00 00 00
(bootloader) [      59] I - Target Failure
(bootloader) [      59] I - CHECK CONDITION
(bootloader) [      59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
(bootloader) [      59] I - SCSI Response(01) : 
(bootloader) [      59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 
(bootloader) 00 00 25 00 00 00 00 00
(bootloader) [      59] I - Target Failure
(bootloader) [      59] I - CHECK CONDITION
(bootloader) [      59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
(bootloader) [      59] I - SCSI Response(01) : 
(bootloader) [      59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 
(bootloader) 00 00 25 00 00 00 00 00
(bootloader) [      59] I - Target Failure
(bootloader) [      59] I - CHECK CONDITION
(bootloader) [      59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
(bootloader) [      59] I - SCSI Response(01) : 
(bootloader) [      59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 
(bootloader) 00 00 25 00 00 00 00 00
(bootloader) [      59] I - Target Failure
(bootloader) [      59] I - CHECK CONDITION
(bootloader) [      59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
(bootloader) [      59] I - SCSI Response(01) : 
(bootloader) [      59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 
(bootloader) 00 00 25 00 00 00 00 00
(bootloader) [      59] I - Target Failure
(bootloader) [      59] I - CHECK CONDITION
(bootloader) [      59] I - [SCSI] LU68 SAMSUNG KLUDG4U1EA-B0C1 0800
(bootloader) [      59] I - [SCSI] LU80 SAMSUNG KLUDG4U1EA-B0C1 0800
(bootloader) [      60] I - PROVISION CHECK: PASS
(bootloader) [      60] I - [PIT] pit init start...
(bootloader) [      60] I - UFS 128GB SAMSUNG KLUDG4U1EA-B0C1 FV=0800
(bootloader) [      60] I - [PIT] pit init passes
(bootloader) [      60] I - AB: initinal_slot_info: _a bootable: 1, 
(bootloader) is_active 1, boot_successful 0, tries_remaining 1
(bootloader) [      60] I - AB: initinal_slot_info: _b bootable: 0, 
(bootloader) is_active 0, boot_successful 0, tries_remaining 0
(bootloader) [      60] I - AB: select_ab_boot_slot: slot a is active, 
(bootloader) slot b is inactive
(bootloader) [      60] I - AB: select_ab_boot_slot: bootloader slot is 
(bootloader) 0
(bootloader) [      60] I - RAMDUMP is disabled
(bootloader) [      70] I - [TMU:39]
(bootloader) [      70] I - exynos_adc_read_raw: ADC conversion time : 
(bootloader) 93 usecs
(bootloader) [      70] I - Battery Thermistor Temperature: 33
(bootloader) [      71] I - 
(bootloader) Checking DRAM training data
(bootloader) [      71] I - ACPM magic code: 0xAC8338A9
(bootloader) [      71] I - Write magic code: 0xF67038A9
(bootloader) [      71] I - 
(bootloader) [      71] I - read whole keystorage partition from the 
(bootloader) storage
(bootloader) [      71] I - keystorage: It is successfully loaded.
(bootloader) [      71] I - keystorage: init done successfully.
(bootloader) [      71] I - ldfw: booting device is UFS.
(bootloader) [      80] I - ldfw: read whole ldfw partition from the 
(bootloader) storage
(bootloader) [      80] I - ldfw: 0th ldfw's version 0x40190111 name : 
(bootloader) CryptoManagerV40
(bootloader) [      80] I - ldfw: 1th ldfw's version 0x20180419 name : 
(bootloader) fmp_fw_V20
(bootloader) [      80] I - ldfw: 2th ldfw's version 0x20181231 name : 
(bootloader) drm_fw
(bootloader) [      80] I - ldfw: 3th ldfw's version 0x24180426 name : 
(bootloader) srpmb_fw
(bootloader) [      80] I - ldfw: 4th ldfw's version 0x20180801 name : 
(bootloader) hdcp_fw
(bootloader) [      80] I - ldfw: 5th ldfw's version 0x20150828 name : 
(bootloader) tail_fw
(bootloader) [      80] I - ldfw: init ldfw(s). whole ldfws size 
(bootloader) 0x3ec000
(bootloader) [     154] I - ldfw: try to init 5 ldfw(s). except 0 ldfw 5 
(bootloader) ldfw(s) have been inited done.
(bootloader) [     154] I - ldfw: init done successfully.
(bootloader) [     154] I - RPMB: key already programmed
(bootloader) [     154] I - RPMB: key blocking: success
(bootloader) [     154] I - RPMB: get hmac value: success
(bootloader) [     154] I - HMAC compare success !!
(bootloader) [     154] I - RPMB: get hmac value: success
(bootloader) [     154] I - HMAC compare success !!
(bootloader) [     155] I - RPMB: get hmac value: success
(bootloader) [     155] I - HMAC compare success !!
(bootloader) [     155] I - RPMB: get hmac value: success
(bootloader) [     155] I - HMAC compare success !!
(bootloader) [     155] I - RPMB: get hmac value: success
(bootloader) [     155] I - HMAC compare success !!
(bootloader) [     155] I - 
(bootloader) [     155] I - RAM: SAMSUNG, LP4x, 4096 MB, MR5:0x01, 
(bootloader) MR6:0x06, MR7:0x01, MR8:0x12
(bootloader) [     155] I - [OTP] USE_ROM_SEC_BOOT_KEY read: start
(bootloader) [     155] I - [OTP] USE_ROM_SEC_BOOT_KEY read value: 0x0
(bootloader) [     160] I - exynos_adc_read_raw: ADC conversion time : 
(bootloader) 91 usecs
(bootloader) [     160] I - Motorola HWID 1: E (0x893)
(bootloader) [     160] I - exynos_adc_read_raw: ADC conversion time : 
(bootloader) 92 usecs
(bootloader) [     160] I - Motorola HWID 2: A (0x0)
(bootloader) [     160] I - No setting for /exynos9610,product@3
(bootloader) [     160] I - Failed to get exactly compatible device tree 
(bootloader) for [troika, DVT], latest device tree for HW Rev[EVT0] is 
(bootloader) used: product@2
(bootloader) [     160] I - SP init done
(bootloader) [     160] I - [OTP] CUSTOM_FLAG read start
(bootloader) [     161] I - [OTP] CUSTOM_FLAG read value: 0x0
(bootloader) [     161] C - sdb dis otp bit:0
(bootloader) [     161] I - cid_get_cid_data: Version 0 datablock
(bootloader) [     161] I - dbval_db_validate_gen_hdr - Check Type
(bootloader) [     161] I - validate header error: 55
(bootloader) [     161] C - ssm_get_cid: loaded CID=65535
(bootloader) [     161] C - CID datablock is NOT installed, feature 
(bootloader) disabled
(bootloader) [     161] C - Magic num error in the token file
(bootloader) [     161] I - write protect no supported
(bootloader) [     161] I - ssm init done, security state:2, 
(bootloader) debuglevel:0
(bootloader) [     173] C - parse_auto_rule_uspace: utag [build_vars] 
(bootloader) empty [0] - skip auto detect
(bootloader) [     173] C - utag_autodetect_cb: failed to autodetect 
(bootloader) value for [frontcolor]
(bootloader) [     174] I - get auto recovery flag: 1
(bootloader) [     174] I - PMUDBG_CENTRAL_SEQ_*: apsoc 0x0 mif 0x0 apm 
(bootloader) 0x0
(bootloader) [     174] I - PMUDBG_CL0_*: 
(bootloader) [     174] I - cpu0: 0x0 
(bootloader) [     174] I - cpu1: 0x0 
(bootloader) [     174] I - cpu2: 0x0 
(bootloader) [     174] I - cpu3: 0x0 
(bootloader) [     174] I - PMUDBG_CL1_*: 
(bootloader) [     174] I - cpu0: 0x0 
(bootloader) [     174] I - cpu1: 0x0 
(bootloader) [     174] I - cpu2: 0x0 
(bootloader) [     174] I - cpu3: 0x0 
(bootloader) [     174] I - Watchdog mask_wdt_reset register mask!
(bootloader) [     174] I - Watchdog cluster 0 stop done, WTCON = 8000
(bootloader) [     174] I - Clear bootloader booting start flag
(bootloader) [     174] I - fg_init_s2mu106: 0x49 = 0x33
(bootloader) [     174] I - 
(bootloader) [     174] I - fg_get_serialnumber,Utags Serial Number 
(bootloader) SB18C43602
(bootloader) [     174] I - fg_get_serialnumber,Default Serial Number 
(bootloader) SB18C43602
(bootloader) [     174] I - fg_get_serialnumber, battery matched index:0
(bootloader) [     174] I - s2mu106_select_battery_table,load battery 
(bootloader) profile:0
(bootloader) [     175] I - s2mu106_check_por: 0x1F = 0x00
(bootloader) [     175] I - s2mu106_check_por: 0x1E = 0x03
(bootloader) [     175] I - s2mu106_check_param_ver: parameter ver in 
(bootloader) IC: 0x03, in LK: 0x03
(bootloader) [     175] I - fg_init_s2mu106: Fuelgauge is Already 
(bootloader) initialized
(bootloader) [     184] I - Time is: "Tue Apr 29  5:23:38 UTC 2025"
(bootloader) [     184] C - No settings for factory_kill in FDT
(bootloader) [     184] I - SOD: loading config
(bootloader) [     195] I - starting app mbm
(bootloader) [     195] I - MBM version is 
(bootloader) MBM-2.2-troika_retail-a38dd6e2345-220629
(bootloader) [     195] I - Serial number: "NTKA130019"
(bootloader) [     196] I - starting app screen_manager
(bootloader) [     196] I - Initializing display...
(bootloader) [     196] I - create panel for 
(bootloader) mipi_mot_vid_tianma_fhd_635...
(bootloader) [     196] C - Use the 12bit mipi backlight
(bootloader) [     196] I - create panel for 
(bootloader) mipi_mot_vid_tianma_fhd_636...
(bootloader) [     196] C - Use the default bits : 8bits
(bootloader) [     196] I - create panel for 
(bootloader) mipi_mot_vid_tianma_fhd_620...
(bootloader) [     196] C - Use the default bits : 8bits
(bootloader) [     196] I - Searching panel driver for: 
(bootloader) mipi_mot_vid_tianma_fhd_635
(bootloader) [     196] I - find UTAG "display", skip auto detect!
(bootloader) [     236] I - partition name strip suffix:keystorage
(bootloader) [     236] I - engineering device, bypass keystorage 
(bootloader) validation
(bootloader) [     236] I - keystorage authentication success
(bootloader) [     236] I - Entering normal Android mode
(bootloader) [     236] I - Enable dumpGPR - f01
(bootloader) [     237] I - s2mu106_rgb_set_mode: S2MU106_RGB_LED_EN = 
(bootloader) 0x00
(bootloader) [     237] I - s2mu106_rgb_set_brightness: brightness = 0
(bootloader) [     247] I - MOT panel supplier_id=0x1047291
(bootloader) [     247] I - success install mipi_mot_vid_tianma_fhd_635 
(bootloader) driver !
(bootloader) [     428] I - Display initialized successfully!
(bootloader) [     428] I - Initializing display done
(bootloader) [    1307] I - AB: partition_recovery_slot_booting: power 
(bootloader) off device for retrial kicking in
(bootloader) [    1307] I - get auto recovery enabled state 1
(bootloader) [    1307] I - AB auto recovery booting
(bootloader) [    1307] I - AB: partition_find_boot_slot: active_slot is 
(bootloader) 0, boot_slot is 0
(bootloader) [    1307] I - AB: partition_find_boot_slot: Current slot 
(bootloader) remaining retry count :1
(bootloader) [    1313] I - AB: partition_find_boot_slot: Booting SLOT 0
(bootloader) [    1313] I - Active Slot: (_a)
(bootloader) [    1314] I - charger_type_detection,register:4
(bootloader) [    1314] I - set accessory type 1
(bootloader) [    1314] I - PowerUp - Voltage: 3500mV Current: 500mA 
(bootloader) accy type:1
(bootloader) [    1315] I - s2mu106_get_vbat: vbat (4273), src(0x88C3)
(bootloader) [    1315] I - Battery threshold = 3500mV, status: 4273
(bootloader) [    1379] I - partition name strip suffix:logo
(bootloader) [    1379] I - engineering device, bypass logo validation
(bootloader) [    1379] I - logo authentication success
(bootloader) [    1455] I - display_draw_logo: flush surface...
(bootloader) [    1456] I - display_draw_logo: flush surface end
(bootloader) [    1511] I - turn_on_backlight is called
(bootloader) [    1520] I - Showing logo completed
(bootloader) [    1645] I - partition name strip suffix:boot
(bootloader) [    1645] I - avbops functions are set successfully
(bootloader) [    1645] C - fall back to call native partition:vbmeta_a
(bootloader) [    1645] I - First block
(bootloader) [    1645] I - Middle blocks
(bootloader) [    1652] I - free(tmp_buff)
(bootloader) [    1652] I - *out_num_read = num_bytes
(bootloader) [    1659] I - override the AVB key check, factory: 0
(bootloader) [    1659] C - found mbm partition:boot_a
(bootloader) [    1660] I - boot authentication success
(bootloader) [    1665] I - partition name strip suffix:dtbo
(bootloader) [    1665] I - avbops functions are set successfully
(bootloader) [    1665] C - fall back to call native partition:vbmeta_a
(bootloader) [    1665] I - First block
(bootloader) [    1665] I - Middle blocks
(bootloader) [    1672] I - free(tmp_buff)
(bootloader) [    1672] I - *out_num_read = num_bytes
(bootloader) [    1679] I - override the AVB key check, factory: 0
(bootloader) [    1679] C - found mbm partition:dtbo_a
(bootloader) [    1680] I - dtbo authentication success
(bootloader) [    1680] I - OS FingerPrint: N/A
(bootloader) [    3669] I - display_draw_logo: flush surface...
(bootloader) [    3670] I - display_draw_logo: flush surface end
(bootloader) [    3671] I - is AMR64
(bootloader) [    3671] I - kernel  @ 0x80080000 (33198092 bytes)
(bootloader) [    3688] I - ramdisk @ 0x84000000 (15031601 bytes)
(bootloader) [    3696] I - dtb @ 0x8a000000 (133209 bytes)
(bootloader) [    3696] I - SEC_DRAM_BASE[0xbc800000]
(bootloader) [    3696] I - SEC_DRAM_SIZE[0x3800000]
(bootloader) [    3696] I - SEC_PGTBL_BASE[0xe0000000]
(bootloader) [    3696] I - SEC_PGTBL_SIZE[0xd00000]
(bootloader) [    3697] C - DTBO: bad dtbo: FDT_ERR_BADMAGIC
(bootloader) [    3697] I - No matched for device :0xe9610000:0xb000
(bootloader) [    3697] I - get device tree failed
(bootloader) [    3697] E - Failed to get device tree
(bootloader) [    3697] C - Error: failed to load kernel!
(bootloader) [    6697] I - AB: partition_find_boot_slot: active_slot is 
(bootloader) 0, boot_slot is 0
(bootloader) [    6697] I - AB: partition_find_boot_slot: Current slot 
(bootloader) remaining retry count :0
(bootloader) [    6703] C - AB: next_active_bootable_slot: ERROR: Unable 
(bootloader) to find any bootable slot
(bootloader) [    6703] I - AB: partition_find_boot_slot: 
(bootloader) switch_boot_slot = -1
(bootloader) [    6703] I - AB: partition_find_boot_slot: Booting SLOT 
(bootloader) -1
(bootloader) [    6703] C - No bootable A/B slot
(bootloader) [    6703] C - Failed to boot Linux,falling back to 
(bootloader) fastboot
(bootloader) [    6703] I - Entering normal mode fails, falling into its 
(bootloader) fail-safe mode.
(bootloader) [    6703] I - Entering fastboot mode
(bootloader) [    6703] I - Fastboot Reason: Fall-through from normal 
(bootloader) boot mode
(bootloader) [    6703] I - IMEI/MEID: 000000000000000
(bootloader) [    6703] I - SKU: 000000000000000
(bootloader) [    6703] I - DATE: 01-01-1970
(bootloader) [    6733] C - display_image: No valid logo partition
(bootloader) [    6739] I - muic_sw_open
(bootloader) [    6739] C - This is fboot_usbctl_init 
(bootloader) [    6752] I - muic_sw_usb
(bootloader) [    6754] I - s2mu106_get_vbat: vbat (4231), src(0x8768)
(bootloader) [    6754] I - Battery threshold = 4200mV, status: 4231
(bootloader) [    6766] I - charging is disabled
(bootloader) [    6790] I - reach the limit, exit charging
(bootloader) [    6791] I - USB connected
(bootloader) [    6792] I - s2mu106_get_vbat: vbat (4231), src(0x8768)
(bootloader) [    6792] I - Battery threshold = 4200mV, status: 4231
(bootloader) [    6792] I - charging is disabled
(bootloader) [    6792] I - reach the limit, exit charging
(bootloader) [    6803] C - USB CCI unit is enabled.
(bootloader) [    6804] C - USB IP version is 3.10a
(bootloader) [    6804] I - Enable USB Interrupt!
(bootloader) [    7149] I - *****fastboot_notify connected****
(bootloader) [   24048] I - cmd: oem logdump
(bootloader) ************************************************************
(bootloader) ***
(bootloader) ==============================
(bootloader) All Boot Logs have been dumped
OKAY [  3.349s]
Finished. Total time: 3.349s
