To se mi líbí 0
Fork 0

Naposledy aktivní 1745904326

swee revidoval tento gist 1745904325. Přejít na revizi

1 file changed, 332 insertions

gistfile1.txt(vytvořil soubor)

@@ -0,0 +1,332 @@
1 + $ sudo fastboot oem logdump
2 + (bootloader) Dumping Boot Logs:
3 + (bootloader) ==============================
4 + (bootloader) [ 1] I - welcome to lk
5 + (bootloader) [ 1] I - INIT: cpu 0, calling hook 0xff07cf0c
6 + (bootloader) (version) at level 0x3ffff, flags 0x1
7 + (bootloader) [ 1] I - version:
8 + (bootloader) [ 1] I - arch: ARM64
9 + (bootloader) [ 1] I - platform: MAESTRO9610
10 + (bootloader) [ 1] I - target: MAESTRO9610
11 + (bootloader) [ 1] I - project: MAESTRO9610
12 + (bootloader) [ 1] I - buildid: FALSE
13 + (bootloader) [ 1] I - bootloader partition start block(512 Byte):
14 + (bootloader) 1525872
15 + (bootloader) [ 3] I - s2mu106_charger_set_charger_mode:
16 + (bootloader) S2MU106_CHG_CTRL0 = 0x03
17 + (bootloader) [ 3] I - s2mu106_charger_reg_init, 0xec(35)
18 + (bootloader) [ 4] I - s2mu106_charger_reg_init, 0xe5(8)
19 + (bootloader) [ 5] I - s2mu106_charger_reg_init, 0x3D(55)
20 + (bootloader) [ 5] I - s2mu106_charger_reg_init, CTRL4(d)
21 + (bootloader) [ 6] I - power reset reg: 0x00010000, cnt = 0
22 + (bootloader) [ 6] I - Reboot reason: 0x00000000
23 + (bootloader) [ 6] I - mpu09 INT1 reg: 0x43
24 + (bootloader) [ 6] I - mpu09 INT2 reg: 0x14
25 + (bootloader) [ 6] I - mpu09 PWRONSRC reg: 0x01
26 + (bootloader) [ 6] I - mpu09 OFFSRC reg: 0x10
27 + (bootloader) [ 7] I - mu106 device type reg: 0x04
28 + (bootloader) [ 7] I - hard reset
29 + (bootloader) [ 20] I - Secure Payload is loaded successfully!
30 + (bootloader) [ 20] I - gpg1_dat: 33 / board_id: 1
31 + (bootloader) [ 20] I - Enable UFS IO cache coherency
32 + (bootloader) [ 57] I - Use 1 lane connection
33 + (bootloader) [ 58] I - Power mode change: M(1)G(3)L(1)HS-series(2)
34 + (bootloader) [ 59] I - [SCSI] LU0 SAMSUNG KLUDG4U1EA-B0C1 0800
35 + (bootloader) [ 59] I - [SCSI] ufs block count: 31240191
36 + (bootloader) [ 59] I - [SCSI] LU1 SAMSUNG KLUDG4U1EA-B0C1 0800
37 + (bootloader) [ 59] I - [SCSI] ufs block count: 1023
38 + (bootloader) [ 59] I - [SCSI] LU2 SAMSUNG KLUDG4U1EA-B0C1 0800
39 + (bootloader) [ 59] I - [SCSI] ufs block count: 1023
40 + (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
41 + (bootloader) [ 59] I - SCSI Response(01) :
42 + (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00
43 + (bootloader) 00 00 25 00 00 00 00 00
44 + (bootloader) [ 59] I - Target Failure
45 + (bootloader) [ 59] I - CHECK CONDITION
46 + (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
47 + (bootloader) [ 59] I - SCSI Response(01) :
48 + (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00
49 + (bootloader) 00 00 25 00 00 00 00 00
50 + (bootloader) [ 59] I - Target Failure
51 + (bootloader) [ 59] I - CHECK CONDITION
52 + (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
53 + (bootloader) [ 59] I - SCSI Response(01) :
54 + (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00
55 + (bootloader) 00 00 25 00 00 00 00 00
56 + (bootloader) [ 59] I - Target Failure
57 + (bootloader) [ 59] I - CHECK CONDITION
58 + (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
59 + (bootloader) [ 59] I - SCSI Response(01) :
60 + (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00
61 + (bootloader) 00 00 25 00 00 00 00 00
62 + (bootloader) [ 59] I - Target Failure
63 + (bootloader) [ 59] I - CHECK CONDITION
64 + (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00
65 + (bootloader) [ 59] I - SCSI Response(01) :
66 + (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00
67 + (bootloader) 00 00 25 00 00 00 00 00
68 + (bootloader) [ 59] I - Target Failure
69 + (bootloader) [ 59] I - CHECK CONDITION
70 + (bootloader) [ 59] I - [SCSI] LU68 SAMSUNG KLUDG4U1EA-B0C1 0800
71 + (bootloader) [ 59] I - [SCSI] LU80 SAMSUNG KLUDG4U1EA-B0C1 0800
72 + (bootloader) [ 60] I - PROVISION CHECK: PASS
73 + (bootloader) [ 60] I - [PIT] pit init start...
74 + (bootloader) [ 60] I - UFS 128GB SAMSUNG KLUDG4U1EA-B0C1 FV=0800
75 + (bootloader) [ 60] I - [PIT] pit init passes
76 + (bootloader) [ 60] I - AB: initinal_slot_info: _a bootable: 1,
77 + (bootloader) is_active 1, boot_successful 0, tries_remaining 1
78 + (bootloader) [ 60] I - AB: initinal_slot_info: _b bootable: 0,
79 + (bootloader) is_active 0, boot_successful 0, tries_remaining 0
80 + (bootloader) [ 60] I - AB: select_ab_boot_slot: slot a is active,
81 + (bootloader) slot b is inactive
82 + (bootloader) [ 60] I - AB: select_ab_boot_slot: bootloader slot is
83 + (bootloader) 0
84 + (bootloader) [ 60] I - RAMDUMP is disabled
85 + (bootloader) [ 70] I - [TMU:39]
86 + (bootloader) [ 70] I - exynos_adc_read_raw: ADC conversion time :
87 + (bootloader) 93 usecs
88 + (bootloader) [ 70] I - Battery Thermistor Temperature: 33
89 + (bootloader) [ 71] I -
90 + (bootloader) Checking DRAM training data
91 + (bootloader) [ 71] I - ACPM magic code: 0xAC8338A9
92 + (bootloader) [ 71] I - Write magic code: 0xF67038A9
93 + (bootloader) [ 71] I -
94 + (bootloader) [ 71] I - read whole keystorage partition from the
95 + (bootloader) storage
96 + (bootloader) [ 71] I - keystorage: It is successfully loaded.
97 + (bootloader) [ 71] I - keystorage: init done successfully.
98 + (bootloader) [ 71] I - ldfw: booting device is UFS.
99 + (bootloader) [ 80] I - ldfw: read whole ldfw partition from the
100 + (bootloader) storage
101 + (bootloader) [ 80] I - ldfw: 0th ldfw's version 0x40190111 name :
102 + (bootloader) CryptoManagerV40
103 + (bootloader) [ 80] I - ldfw: 1th ldfw's version 0x20180419 name :
104 + (bootloader) fmp_fw_V20
105 + (bootloader) [ 80] I - ldfw: 2th ldfw's version 0x20181231 name :
106 + (bootloader) drm_fw
107 + (bootloader) [ 80] I - ldfw: 3th ldfw's version 0x24180426 name :
108 + (bootloader) srpmb_fw
109 + (bootloader) [ 80] I - ldfw: 4th ldfw's version 0x20180801 name :
110 + (bootloader) hdcp_fw
111 + (bootloader) [ 80] I - ldfw: 5th ldfw's version 0x20150828 name :
112 + (bootloader) tail_fw
113 + (bootloader) [ 80] I - ldfw: init ldfw(s). whole ldfws size
114 + (bootloader) 0x3ec000
115 + (bootloader) [ 154] I - ldfw: try to init 5 ldfw(s). except 0 ldfw 5
116 + (bootloader) ldfw(s) have been inited done.
117 + (bootloader) [ 154] I - ldfw: init done successfully.
118 + (bootloader) [ 154] I - RPMB: key already programmed
119 + (bootloader) [ 154] I - RPMB: key blocking: success
120 + (bootloader) [ 154] I - RPMB: get hmac value: success
121 + (bootloader) [ 154] I - HMAC compare success !!
122 + (bootloader) [ 154] I - RPMB: get hmac value: success
123 + (bootloader) [ 154] I - HMAC compare success !!
124 + (bootloader) [ 155] I - RPMB: get hmac value: success
125 + (bootloader) [ 155] I - HMAC compare success !!
126 + (bootloader) [ 155] I - RPMB: get hmac value: success
127 + (bootloader) [ 155] I - HMAC compare success !!
128 + (bootloader) [ 155] I - RPMB: get hmac value: success
129 + (bootloader) [ 155] I - HMAC compare success !!
130 + (bootloader) [ 155] I -
131 + (bootloader) [ 155] I - RAM: SAMSUNG, LP4x, 4096 MB, MR5:0x01,
132 + (bootloader) MR6:0x06, MR7:0x01, MR8:0x12
133 + (bootloader) [ 155] I - [OTP] USE_ROM_SEC_BOOT_KEY read: start
134 + (bootloader) [ 155] I - [OTP] USE_ROM_SEC_BOOT_KEY read value: 0x0
135 + (bootloader) [ 160] I - exynos_adc_read_raw: ADC conversion time :
136 + (bootloader) 91 usecs
137 + (bootloader) [ 160] I - Motorola HWID 1: E (0x893)
138 + (bootloader) [ 160] I - exynos_adc_read_raw: ADC conversion time :
139 + (bootloader) 92 usecs
140 + (bootloader) [ 160] I - Motorola HWID 2: A (0x0)
141 + (bootloader) [ 160] I - No setting for /exynos9610,product@3
142 + (bootloader) [ 160] I - Failed to get exactly compatible device tree
143 + (bootloader) for [troika, DVT], latest device tree for HW Rev[EVT0] is
144 + (bootloader) used: product@2
145 + (bootloader) [ 160] I - SP init done
146 + (bootloader) [ 160] I - [OTP] CUSTOM_FLAG read start
147 + (bootloader) [ 161] I - [OTP] CUSTOM_FLAG read value: 0x0
148 + (bootloader) [ 161] C - sdb dis otp bit:0
149 + (bootloader) [ 161] I - cid_get_cid_data: Version 0 datablock
150 + (bootloader) [ 161] I - dbval_db_validate_gen_hdr - Check Type
151 + (bootloader) [ 161] I - validate header error: 55
152 + (bootloader) [ 161] C - ssm_get_cid: loaded CID=65535
153 + (bootloader) [ 161] C - CID datablock is NOT installed, feature
154 + (bootloader) disabled
155 + (bootloader) [ 161] C - Magic num error in the token file
156 + (bootloader) [ 161] I - write protect no supported
157 + (bootloader) [ 161] I - ssm init done, security state:2,
158 + (bootloader) debuglevel:0
159 + (bootloader) [ 173] C - parse_auto_rule_uspace: utag [build_vars]
160 + (bootloader) empty [0] - skip auto detect
161 + (bootloader) [ 173] C - utag_autodetect_cb: failed to autodetect
162 + (bootloader) value for [frontcolor]
163 + (bootloader) [ 174] I - get auto recovery flag: 1
164 + (bootloader) [ 174] I - PMUDBG_CENTRAL_SEQ_*: apsoc 0x0 mif 0x0 apm
165 + (bootloader) 0x0
166 + (bootloader) [ 174] I - PMUDBG_CL0_*:
167 + (bootloader) [ 174] I - cpu0: 0x0
168 + (bootloader) [ 174] I - cpu1: 0x0
169 + (bootloader) [ 174] I - cpu2: 0x0
170 + (bootloader) [ 174] I - cpu3: 0x0
171 + (bootloader) [ 174] I - PMUDBG_CL1_*:
172 + (bootloader) [ 174] I - cpu0: 0x0
173 + (bootloader) [ 174] I - cpu1: 0x0
174 + (bootloader) [ 174] I - cpu2: 0x0
175 + (bootloader) [ 174] I - cpu3: 0x0
176 + (bootloader) [ 174] I - Watchdog mask_wdt_reset register mask!
177 + (bootloader) [ 174] I - Watchdog cluster 0 stop done, WTCON = 8000
178 + (bootloader) [ 174] I - Clear bootloader booting start flag
179 + (bootloader) [ 174] I - fg_init_s2mu106: 0x49 = 0x33
180 + (bootloader) [ 174] I -
181 + (bootloader) [ 174] I - fg_get_serialnumber,Utags Serial Number
182 + (bootloader) SB18C43602
183 + (bootloader) [ 174] I - fg_get_serialnumber,Default Serial Number
184 + (bootloader) SB18C43602
185 + (bootloader) [ 174] I - fg_get_serialnumber, battery matched index:0
186 + (bootloader) [ 174] I - s2mu106_select_battery_table,load battery
187 + (bootloader) profile:0
188 + (bootloader) [ 175] I - s2mu106_check_por: 0x1F = 0x00
189 + (bootloader) [ 175] I - s2mu106_check_por: 0x1E = 0x03
190 + (bootloader) [ 175] I - s2mu106_check_param_ver: parameter ver in
191 + (bootloader) IC: 0x03, in LK: 0x03
192 + (bootloader) [ 175] I - fg_init_s2mu106: Fuelgauge is Already
193 + (bootloader) initialized
194 + (bootloader) [ 184] I - Time is: "Tue Apr 29 5:23:38 UTC 2025"
195 + (bootloader) [ 184] C - No settings for factory_kill in FDT
196 + (bootloader) [ 184] I - SOD: loading config
197 + (bootloader) [ 195] I - starting app mbm
198 + (bootloader) [ 195] I - MBM version is
199 + (bootloader) MBM-2.2-troika_retail-a38dd6e2345-220629
200 + (bootloader) [ 195] I - Serial number: "NTKA130019"
201 + (bootloader) [ 196] I - starting app screen_manager
202 + (bootloader) [ 196] I - Initializing display...
203 + (bootloader) [ 196] I - create panel for
204 + (bootloader) mipi_mot_vid_tianma_fhd_635...
205 + (bootloader) [ 196] C - Use the 12bit mipi backlight
206 + (bootloader) [ 196] I - create panel for
207 + (bootloader) mipi_mot_vid_tianma_fhd_636...
208 + (bootloader) [ 196] C - Use the default bits : 8bits
209 + (bootloader) [ 196] I - create panel for
210 + (bootloader) mipi_mot_vid_tianma_fhd_620...
211 + (bootloader) [ 196] C - Use the default bits : 8bits
212 + (bootloader) [ 196] I - Searching panel driver for:
213 + (bootloader) mipi_mot_vid_tianma_fhd_635
214 + (bootloader) [ 196] I - find UTAG "display", skip auto detect!
215 + (bootloader) [ 236] I - partition name strip suffix:keystorage
216 + (bootloader) [ 236] I - engineering device, bypass keystorage
217 + (bootloader) validation
218 + (bootloader) [ 236] I - keystorage authentication success
219 + (bootloader) [ 236] I - Entering normal Android mode
220 + (bootloader) [ 236] I - Enable dumpGPR - f01
221 + (bootloader) [ 237] I - s2mu106_rgb_set_mode: S2MU106_RGB_LED_EN =
222 + (bootloader) 0x00
223 + (bootloader) [ 237] I - s2mu106_rgb_set_brightness: brightness = 0
224 + (bootloader) [ 247] I - MOT panel supplier_id=0x1047291
225 + (bootloader) [ 247] I - success install mipi_mot_vid_tianma_fhd_635
226 + (bootloader) driver !
227 + (bootloader) [ 428] I - Display initialized successfully!
228 + (bootloader) [ 428] I - Initializing display done
229 + (bootloader) [ 1307] I - AB: partition_recovery_slot_booting: power
230 + (bootloader) off device for retrial kicking in
231 + (bootloader) [ 1307] I - get auto recovery enabled state 1
232 + (bootloader) [ 1307] I - AB auto recovery booting
233 + (bootloader) [ 1307] I - AB: partition_find_boot_slot: active_slot is
234 + (bootloader) 0, boot_slot is 0
235 + (bootloader) [ 1307] I - AB: partition_find_boot_slot: Current slot
236 + (bootloader) remaining retry count :1
237 + (bootloader) [ 1313] I - AB: partition_find_boot_slot: Booting SLOT 0
238 + (bootloader) [ 1313] I - Active Slot: (_a)
239 + (bootloader) [ 1314] I - charger_type_detection,register:4
240 + (bootloader) [ 1314] I - set accessory type 1
241 + (bootloader) [ 1314] I - PowerUp - Voltage: 3500mV Current: 500mA
242 + (bootloader) accy type:1
243 + (bootloader) [ 1315] I - s2mu106_get_vbat: vbat (4273), src(0x88C3)
244 + (bootloader) [ 1315] I - Battery threshold = 3500mV, status: 4273
245 + (bootloader) [ 1379] I - partition name strip suffix:logo
246 + (bootloader) [ 1379] I - engineering device, bypass logo validation
247 + (bootloader) [ 1379] I - logo authentication success
248 + (bootloader) [ 1455] I - display_draw_logo: flush surface...
249 + (bootloader) [ 1456] I - display_draw_logo: flush surface end
250 + (bootloader) [ 1511] I - turn_on_backlight is called
251 + (bootloader) [ 1520] I - Showing logo completed
252 + (bootloader) [ 1645] I - partition name strip suffix:boot
253 + (bootloader) [ 1645] I - avbops functions are set successfully
254 + (bootloader) [ 1645] C - fall back to call native partition:vbmeta_a
255 + (bootloader) [ 1645] I - First block
256 + (bootloader) [ 1645] I - Middle blocks
257 + (bootloader) [ 1652] I - free(tmp_buff)
258 + (bootloader) [ 1652] I - *out_num_read = num_bytes
259 + (bootloader) [ 1659] I - override the AVB key check, factory: 0
260 + (bootloader) [ 1659] C - found mbm partition:boot_a
261 + (bootloader) [ 1660] I - boot authentication success
262 + (bootloader) [ 1665] I - partition name strip suffix:dtbo
263 + (bootloader) [ 1665] I - avbops functions are set successfully
264 + (bootloader) [ 1665] C - fall back to call native partition:vbmeta_a
265 + (bootloader) [ 1665] I - First block
266 + (bootloader) [ 1665] I - Middle blocks
267 + (bootloader) [ 1672] I - free(tmp_buff)
268 + (bootloader) [ 1672] I - *out_num_read = num_bytes
269 + (bootloader) [ 1679] I - override the AVB key check, factory: 0
270 + (bootloader) [ 1679] C - found mbm partition:dtbo_a
271 + (bootloader) [ 1680] I - dtbo authentication success
272 + (bootloader) [ 1680] I - OS FingerPrint: N/A
273 + (bootloader) [ 3669] I - display_draw_logo: flush surface...
274 + (bootloader) [ 3670] I - display_draw_logo: flush surface end
275 + (bootloader) [ 3671] I - is AMR64
276 + (bootloader) [ 3671] I - kernel @ 0x80080000 (33198092 bytes)
277 + (bootloader) [ 3688] I - ramdisk @ 0x84000000 (15031601 bytes)
278 + (bootloader) [ 3696] I - dtb @ 0x8a000000 (133209 bytes)
279 + (bootloader) [ 3696] I - SEC_DRAM_BASE[0xbc800000]
280 + (bootloader) [ 3696] I - SEC_DRAM_SIZE[0x3800000]
281 + (bootloader) [ 3696] I - SEC_PGTBL_BASE[0xe0000000]
282 + (bootloader) [ 3696] I - SEC_PGTBL_SIZE[0xd00000]
283 + (bootloader) [ 3697] C - DTBO: bad dtbo: FDT_ERR_BADMAGIC
284 + (bootloader) [ 3697] I - No matched for device :0xe9610000:0xb000
285 + (bootloader) [ 3697] I - get device tree failed
286 + (bootloader) [ 3697] E - Failed to get device tree
287 + (bootloader) [ 3697] C - Error: failed to load kernel!
288 + (bootloader) [ 6697] I - AB: partition_find_boot_slot: active_slot is
289 + (bootloader) 0, boot_slot is 0
290 + (bootloader) [ 6697] I - AB: partition_find_boot_slot: Current slot
291 + (bootloader) remaining retry count :0
292 + (bootloader) [ 6703] C - AB: next_active_bootable_slot: ERROR: Unable
293 + (bootloader) to find any bootable slot
294 + (bootloader) [ 6703] I - AB: partition_find_boot_slot:
295 + (bootloader) switch_boot_slot = -1
296 + (bootloader) [ 6703] I - AB: partition_find_boot_slot: Booting SLOT
297 + (bootloader) -1
298 + (bootloader) [ 6703] C - No bootable A/B slot
299 + (bootloader) [ 6703] C - Failed to boot Linux,falling back to
300 + (bootloader) fastboot
301 + (bootloader) [ 6703] I - Entering normal mode fails, falling into its
302 + (bootloader) fail-safe mode.
303 + (bootloader) [ 6703] I - Entering fastboot mode
304 + (bootloader) [ 6703] I - Fastboot Reason: Fall-through from normal
305 + (bootloader) boot mode
306 + (bootloader) [ 6703] I - IMEI/MEID: 000000000000000
307 + (bootloader) [ 6703] I - SKU: 000000000000000
308 + (bootloader) [ 6703] I - DATE: 01-01-1970
309 + (bootloader) [ 6733] C - display_image: No valid logo partition
310 + (bootloader) [ 6739] I - muic_sw_open
311 + (bootloader) [ 6739] C - This is fboot_usbctl_init
312 + (bootloader) [ 6752] I - muic_sw_usb
313 + (bootloader) [ 6754] I - s2mu106_get_vbat: vbat (4231), src(0x8768)
314 + (bootloader) [ 6754] I - Battery threshold = 4200mV, status: 4231
315 + (bootloader) [ 6766] I - charging is disabled
316 + (bootloader) [ 6790] I - reach the limit, exit charging
317 + (bootloader) [ 6791] I - USB connected
318 + (bootloader) [ 6792] I - s2mu106_get_vbat: vbat (4231), src(0x8768)
319 + (bootloader) [ 6792] I - Battery threshold = 4200mV, status: 4231
320 + (bootloader) [ 6792] I - charging is disabled
321 + (bootloader) [ 6792] I - reach the limit, exit charging
322 + (bootloader) [ 6803] C - USB CCI unit is enabled.
323 + (bootloader) [ 6804] C - USB IP version is 3.10a
324 + (bootloader) [ 6804] I - Enable USB Interrupt!
325 + (bootloader) [ 7149] I - *****fastboot_notify connected****
326 + (bootloader) [ 24048] I - cmd: oem logdump
327 + (bootloader) ************************************************************
328 + (bootloader) ***
329 + (bootloader) ==============================
330 + (bootloader) All Boot Logs have been dumped
331 + OKAY [ 3.349s]
332 + Finished. Total time: 3.349s
Novější Starší

Vytvořeno pomocí Opengist ⋅ Load: 41ms⋅

Čeština