swee / gist:add323598381477a83844b4c79875bb1

$ sudo fastboot oem logdump (bootloader) Dumping Boot Logs: (bootloader) ============================== (bootloader) [ 1] I - welcome to lk (bootloader) [ 1] I - INIT: cpu 0, calling hook 0xff07cf0c (bootloader) (version) at level 0x3ffff, flags 0x1 (bootloader) [ 1] I - version: (bootloader) [ 1] I - arch: ARM64 (bootloader) [ 1] I - platform: MAESTRO9610 (bootloader) [ 1] I - target: MAESTRO9610 (bootloader) [ 1] I - project: MAESTRO9610 (bootloader) [ 1] I - buildid: FALSE (bootloader) [ 1] I - bootloader partition start block(512 Byte): (bootloader) 1525872 (bootloader) [ 3] I - s2mu106_charger_set_charger_mode: (bootloader) S2MU106_CHG_CTRL0 = 0x03 (bootloader) [ 3] I - s2mu106_charger_reg_init, 0xec(35) (bootloader) [ 4] I - s2mu106_charger_reg_init, 0xe5(8) (bootloader) [ 5] I - s2mu106_charger_reg_init, 0x3D(55) (bootloader) [ 5] I - s2mu106_charger_reg_init, CTRL4(d) (bootloader) [ 6] I - power reset reg: 0x00010000, cnt = 0 (bootloader) [ 6] I - Reboot reason: 0x00000000 (bootloader) [ 6] I - mpu09 INT1 reg: 0x43 (bootloader) [ 6] I - mpu09 INT2 reg: 0x14 (bootloader) [ 6] I - mpu09 PWRONSRC reg: 0x01 (bootloader) [ 6] I - mpu09 OFFSRC reg: 0x10 (bootloader) [ 7] I - mu106 device type reg: 0x04 (bootloader) [ 7] I - hard reset (bootloader) [ 20] I - Secure Payload is loaded successfully! (bootloader) [ 20] I - gpg1_dat: 33 / board_id: 1 (bootloader) [ 20] I - Enable UFS IO cache coherency (bootloader) [ 57] I - Use 1 lane connection (bootloader) [ 58] I - Power mode change: M(1)G(3)L(1)HS-series(2) (bootloader) [ 59] I - [SCSI] LU0 SAMSUNG KLUDG4U1EA-B0C1 0800 (bootloader) [ 59] I - [SCSI] ufs block count: 31240191 (bootloader) [ 59] I - [SCSI] LU1 SAMSUNG KLUDG4U1EA-B0C1 0800 (bootloader) [ 59] I - [SCSI] ufs block count: 1023 (bootloader) [ 59] I - [SCSI] LU2 SAMSUNG KLUDG4U1EA-B0C1 0800 (bootloader) [ 59] I - [SCSI] ufs block count: 1023 (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00 (bootloader) [ 59] I - SCSI Response(01) : (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 (bootloader) 00 00 25 00 00 00 00 00 (bootloader) [ 59] I - Target Failure (bootloader) [ 59] I - CHECK CONDITION (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00 (bootloader) [ 59] I - SCSI Response(01) : (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 (bootloader) 00 00 25 00 00 00 00 00 (bootloader) [ 59] I - Target Failure (bootloader) [ 59] I - CHECK CONDITION (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00 (bootloader) [ 59] I - SCSI Response(01) : (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 (bootloader) 00 00 25 00 00 00 00 00 (bootloader) [ 59] I - Target Failure (bootloader) [ 59] I - CHECK CONDITION (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00 (bootloader) [ 59] I - SCSI Response(01) : (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 (bootloader) 00 00 25 00 00 00 00 00 (bootloader) [ 59] I - Target Failure (bootloader) [ 59] I - CHECK CONDITION (bootloader) [ 59] I - SCSI cdb : 12 00 00 00 ff 00 00 00 00 00 (bootloader) [ 59] I - SCSI Response(01) : (bootloader) [ 59] I - SCSI sense : 70 00 05 40 00 05 a1 0a 00 00 (bootloader) 00 00 25 00 00 00 00 00 (bootloader) [ 59] I - Target Failure (bootloader) [ 59] I - CHECK CONDITION (bootloader) [ 59] I - [SCSI] LU68 SAMSUNG KLUDG4U1EA-B0C1 0800 (bootloader) [ 59] I - [SCSI] LU80 SAMSUNG KLUDG4U1EA-B0C1 0800 (bootloader) [ 60] I - PROVISION CHECK: PASS (bootloader) [ 60] I - [PIT] pit init start... (bootloader) [ 60] I - UFS 128GB SAMSUNG KLUDG4U1EA-B0C1 FV=0800 (bootloader) [ 60] I - [PIT] pit init passes (bootloader) [ 60] I - AB: initinal_slot_info: _a bootable: 1, (bootloader) is_active 1, boot_successful 0, tries_remaining 1 (bootloader) [ 60] I - AB: initinal_slot_info: _b bootable: 0, (bootloader) is_active 0, boot_successful 0, tries_remaining 0 (bootloader) [ 60] I - AB: select_ab_boot_slot: slot a is active, (bootloader) slot b is inactive (bootloader) [ 60] I - AB: select_ab_boot_slot: bootloader slot is (bootloader) 0 (bootloader) [ 60] I - RAMDUMP is disabled (bootloader) [ 70] I - [TMU:39] (bootloader) [ 70] I - exynos_adc_read_raw: ADC conversion time : (bootloader) 93 usecs (bootloader) [ 70] I - Battery Thermistor Temperature: 33 (bootloader) [ 71] I - (bootloader) Checking DRAM training data (bootloader) [ 71] I - ACPM magic code: 0xAC8338A9 (bootloader) [ 71] I - Write magic code: 0xF67038A9 (bootloader) [ 71] I - (bootloader) [ 71] I - read whole keystorage partition from the (bootloader) storage (bootloader) [ 71] I - keystorage: It is successfully loaded. (bootloader) [ 71] I - keystorage: init done successfully. (bootloader) [ 71] I - ldfw: booting device is UFS. (bootloader) [ 80] I - ldfw: read whole ldfw partition from the (bootloader) storage (bootloader) [ 80] I - ldfw: 0th ldfw's version 0x40190111 name : (bootloader) CryptoManagerV40 (bootloader) [ 80] I - ldfw: 1th ldfw's version 0x20180419 name : (bootloader) fmp_fw_V20 (bootloader) [ 80] I - ldfw: 2th ldfw's version 0x20181231 name : (bootloader) drm_fw (bootloader) [ 80] I - ldfw: 3th ldfw's version 0x24180426 name : (bootloader) srpmb_fw (bootloader) [ 80] I - ldfw: 4th ldfw's version 0x20180801 name : (bootloader) hdcp_fw (bootloader) [ 80] I - ldfw: 5th ldfw's version 0x20150828 name : (bootloader) tail_fw (bootloader) [ 80] I - ldfw: init ldfw(s). whole ldfws size (bootloader) 0x3ec000 (bootloader) [ 154] I - ldfw: try to init 5 ldfw(s). except 0 ldfw 5 (bootloader) ldfw(s) have been inited done. (bootloader) [ 154] I - ldfw: init done successfully. (bootloader) [ 154] I - RPMB: key already programmed (bootloader) [ 154] I - RPMB: key blocking: success (bootloader) [ 154] I - RPMB: get hmac value: success (bootloader) [ 154] I - HMAC compare success !! (bootloader) [ 154] I - RPMB: get hmac value: success (bootloader) [ 154] I - HMAC compare success !! (bootloader) [ 155] I - RPMB: get hmac value: success (bootloader) [ 155] I - HMAC compare success !! (bootloader) [ 155] I - RPMB: get hmac value: success (bootloader) [ 155] I - HMAC compare success !! (bootloader) [ 155] I - RPMB: get hmac value: success (bootloader) [ 155] I - HMAC compare success !! (bootloader) [ 155] I - (bootloader) [ 155] I - RAM: SAMSUNG, LP4x, 4096 MB, MR5:0x01, (bootloader) MR6:0x06, MR7:0x01, MR8:0x12 (bootloader) [ 155] I - [OTP] USE_ROM_SEC_BOOT_KEY read: start (bootloader) [ 155] I - [OTP] USE_ROM_SEC_BOOT_KEY read value: 0x0 (bootloader) [ 160] I - exynos_adc_read_raw: ADC conversion time : (bootloader) 91 usecs (bootloader) [ 160] I - Motorola HWID 1: E (0x893) (bootloader) [ 160] I - exynos_adc_read_raw: ADC conversion time : (bootloader) 92 usecs (bootloader) [ 160] I - Motorola HWID 2: A (0x0) (bootloader) [ 160] I - No setting for /exynos9610,product@3 (bootloader) [ 160] I - Failed to get exactly compatible device tree (bootloader) for [troika, DVT], latest device tree for HW Rev[EVT0] is (bootloader) used: product@2 (bootloader) [ 160] I - SP init done (bootloader) [ 160] I - [OTP] CUSTOM_FLAG read start (bootloader) [ 161] I - [OTP] CUSTOM_FLAG read value: 0x0 (bootloader) [ 161] C - sdb dis otp bit:0 (bootloader) [ 161] I - cid_get_cid_data: Version 0 datablock (bootloader) [ 161] I - dbval_db_validate_gen_hdr - Check Type (bootloader) [ 161] I - validate header error: 55 (bootloader) [ 161] C - ssm_get_cid: loaded CID=65535 (bootloader) [ 161] C - CID datablock is NOT installed, feature (bootloader) disabled (bootloader) [ 161] C - Magic num error in the token file (bootloader) [ 161] I - write protect no supported (bootloader) [ 161] I - ssm init done, security state:2, (bootloader) debuglevel:0 (bootloader) [ 173] C - parse_auto_rule_uspace: utag [build_vars] (bootloader) empty [0] - skip auto detect (bootloader) [ 173] C - utag_autodetect_cb: failed to autodetect (bootloader) value for [frontcolor] (bootloader) [ 174] I - get auto recovery flag: 1 (bootloader) [ 174] I - PMUDBG_CENTRAL_SEQ_*: apsoc 0x0 mif 0x0 apm (bootloader) 0x0 (bootloader) [ 174] I - PMUDBG_CL0_*: (bootloader) [ 174] I - cpu0: 0x0 (bootloader) [ 174] I - cpu1: 0x0 (bootloader) [ 174] I - cpu2: 0x0 (bootloader) [ 174] I - cpu3: 0x0 (bootloader) [ 174] I - PMUDBG_CL1_*: (bootloader) [ 174] I - cpu0: 0x0 (bootloader) [ 174] I - cpu1: 0x0 (bootloader) [ 174] I - cpu2: 0x0 (bootloader) [ 174] I - cpu3: 0x0 (bootloader) [ 174] I - Watchdog mask_wdt_reset register mask! (bootloader) [ 174] I - Watchdog cluster 0 stop done, WTCON = 8000 (bootloader) [ 174] I - Clear bootloader booting start flag (bootloader) [ 174] I - fg_init_s2mu106: 0x49 = 0x33 (bootloader) [ 174] I - (bootloader) [ 174] I - fg_get_serialnumber,Utags Serial Number (bootloader) SB18C43602 (bootloader) [ 174] I - fg_get_serialnumber,Default Serial Number (bootloader) SB18C43602 (bootloader) [ 174] I - fg_get_serialnumber, battery matched index:0 (bootloader) [ 174] I - s2mu106_select_battery_table,load battery (bootloader) profile:0 (bootloader) [ 175] I - s2mu106_check_por: 0x1F = 0x00 (bootloader) [ 175] I - s2mu106_check_por: 0x1E = 0x03 (bootloader) [ 175] I - s2mu106_check_param_ver: parameter ver in (bootloader) IC: 0x03, in LK: 0x03 (bootloader) [ 175] I - fg_init_s2mu106: Fuelgauge is Already (bootloader) initialized (bootloader) [ 184] I - Time is: "Tue Apr 29 5:23:38 UTC 2025" (bootloader) [ 184] C - No settings for factory_kill in FDT (bootloader) [ 184] I - SOD: loading config (bootloader) [ 195] I - starting app mbm (bootloader) [ 195] I - MBM version is (bootloader) MBM-2.2-troika_retail-a38dd6e2345-220629 (bootloader) [ 195] I - Serial number: "NTKA130019" (bootloader) [ 196] I - starting app screen_manager (bootloader) [ 196] I - Initializing display... (bootloader) [ 196] I - create panel for (bootloader) mipi_mot_vid_tianma_fhd_635... (bootloader) [ 196] C - Use the 12bit mipi backlight (bootloader) [ 196] I - create panel for (bootloader) mipi_mot_vid_tianma_fhd_636... (bootloader) [ 196] C - Use the default bits : 8bits (bootloader) [ 196] I - create panel for (bootloader) mipi_mot_vid_tianma_fhd_620... (bootloader) [ 196] C - Use the default bits : 8bits (bootloader) [ 196] I - Searching panel driver for: (bootloader) mipi_mot_vid_tianma_fhd_635 (bootloader) [ 196] I - find UTAG "display", skip auto detect! (bootloader) [ 236] I - partition name strip suffix:keystorage (bootloader) [ 236] I - engineering device, bypass keystorage (bootloader) validation (bootloader) [ 236] I - keystorage authentication success (bootloader) [ 236] I - Entering normal Android mode (bootloader) [ 236] I - Enable dumpGPR - f01 (bootloader) [ 237] I - s2mu106_rgb_set_mode: S2MU106_RGB_LED_EN = (bootloader) 0x00 (bootloader) [ 237] I - s2mu106_rgb_set_brightness: brightness = 0 (bootloader) [ 247] I - MOT panel supplier_id=0x1047291 (bootloader) [ 247] I - success install mipi_mot_vid_tianma_fhd_635 (bootloader) driver ! (bootloader) [ 428] I - Display initialized successfully! (bootloader) [ 428] I - Initializing display done (bootloader) [ 1307] I - AB: partition_recovery_slot_booting: power (bootloader) off device for retrial kicking in (bootloader) [ 1307] I - get auto recovery enabled state 1 (bootloader) [ 1307] I - AB auto recovery booting (bootloader) [ 1307] I - AB: partition_find_boot_slot: active_slot is (bootloader) 0, boot_slot is 0 (bootloader) [ 1307] I - AB: partition_find_boot_slot: Current slot (bootloader) remaining retry count :1 (bootloader) [ 1313] I - AB: partition_find_boot_slot: Booting SLOT 0 (bootloader) [ 1313] I - Active Slot: (_a) (bootloader) [ 1314] I - charger_type_detection,register:4 (bootloader) [ 1314] I - set accessory type 1 (bootloader) [ 1314] I - PowerUp - Voltage: 3500mV Current: 500mA (bootloader) accy type:1 (bootloader) [ 1315] I - s2mu106_get_vbat: vbat (4273), src(0x88C3) (bootloader) [ 1315] I - Battery threshold = 3500mV, status: 4273 (bootloader) [ 1379] I - partition name strip suffix:logo (bootloader) [ 1379] I - engineering device, bypass logo validation (bootloader) [ 1379] I - logo authentication success (bootloader) [ 1455] I - display_draw_logo: flush surface... (bootloader) [ 1456] I - display_draw_logo: flush surface end (bootloader) [ 1511] I - turn_on_backlight is called (bootloader) [ 1520] I - Showing logo completed (bootloader) [ 1645] I - partition name strip suffix:boot (bootloader) [ 1645] I - avbops functions are set successfully (bootloader) [ 1645] C - fall back to call native partition:vbmeta_a (bootloader) [ 1645] I - First block (bootloader) [ 1645] I - Middle blocks (bootloader) [ 1652] I - free(tmp_buff) (bootloader) [ 1652] I - *out_num_read = num_bytes (bootloader) [ 1659] I - override the AVB key check, factory: 0 (bootloader) [ 1659] C - found mbm partition:boot_a (bootloader) [ 1660] I - boot authentication success (bootloader) [ 1665] I - partition name strip suffix:dtbo (bootloader) [ 1665] I - avbops functions are set successfully (bootloader) [ 1665] C - fall back to call native partition:vbmeta_a (bootloader) [ 1665] I - First block (bootloader) [ 1665] I - Middle blocks (bootloader) [ 1672] I - free(tmp_buff) (bootloader) [ 1672] I - *out_num_read = num_bytes (bootloader) [ 1679] I - override the AVB key check, factory: 0 (bootloader) [ 1679] C - found mbm partition:dtbo_a (bootloader) [ 1680] I - dtbo authentication success (bootloader) [ 1680] I - OS FingerPrint: N/A (bootloader) [ 3669] I - display_draw_logo: flush surface... (bootloader) [ 3670] I - display_draw_logo: flush surface end (bootloader) [ 3671] I - is AMR64 (bootloader) [ 3671] I - kernel @ 0x80080000 (33198092 bytes) (bootloader) [ 3688] I - ramdisk @ 0x84000000 (15031601 bytes) (bootloader) [ 3696] I - dtb @ 0x8a000000 (133209 bytes) (bootloader) [ 3696] I - SEC_DRAM_BASE[0xbc800000] (bootloader) [ 3696] I - SEC_DRAM_SIZE[0x3800000] (bootloader) [ 3696] I - SEC_PGTBL_BASE[0xe0000000] (bootloader) [ 3696] I - SEC_PGTBL_SIZE[0xd00000] (bootloader) [ 3697] C - DTBO: bad dtbo: FDT_ERR_BADMAGIC (bootloader) [ 3697] I - No matched for device :0xe9610000:0xb000 (bootloader) [ 3697] I - get device tree failed (bootloader) [ 3697] E - Failed to get device tree (bootloader) [ 3697] C - Error: failed to load kernel! (bootloader) [ 6697] I - AB: partition_find_boot_slot: active_slot is (bootloader) 0, boot_slot is 0 (bootloader) [ 6697] I - AB: partition_find_boot_slot: Current slot (bootloader) remaining retry count :0 (bootloader) [ 6703] C - AB: next_active_bootable_slot: ERROR: Unable (bootloader) to find any bootable slot (bootloader) [ 6703] I - AB: partition_find_boot_slot: (bootloader) switch_boot_slot = -1 (bootloader) [ 6703] I - AB: partition_find_boot_slot: Booting SLOT (bootloader) -1 (bootloader) [ 6703] C - No bootable A/B slot (bootloader) [ 6703] C - Failed to boot Linux,falling back to (bootloader) fastboot (bootloader) [ 6703] I - Entering normal mode fails, falling into its (bootloader) fail-safe mode. (bootloader) [ 6703] I - Entering fastboot mode (bootloader) [ 6703] I - Fastboot Reason: Fall-through from normal (bootloader) boot mode (bootloader) [ 6703] I - IMEI/MEID: 000000000000000 (bootloader) [ 6703] I - SKU: 000000000000000 (bootloader) [ 6703] I - DATE: 01-01-1970 (bootloader) [ 6733] C - display_image: No valid logo partition (bootloader) [ 6739] I - muic_sw_open (bootloader) [ 6739] C - This is fboot_usbctl_init (bootloader) [ 6752] I - muic_sw_usb (bootloader) [ 6754] I - s2mu106_get_vbat: vbat (4231), src(0x8768) (bootloader) [ 6754] I - Battery threshold = 4200mV, status: 4231 (bootloader) [ 6766] I - charging is disabled (bootloader) [ 6790] I - reach the limit, exit charging (bootloader) [ 6791] I - USB connected (bootloader) [ 6792] I - s2mu106_get_vbat: vbat (4231), src(0x8768) (bootloader) [ 6792] I - Battery threshold = 4200mV, status: 4231 (bootloader) [ 6792] I - charging is disabled (bootloader) [ 6792] I - reach the limit, exit charging (bootloader) [ 6803] C - USB CCI unit is enabled. (bootloader) [ 6804] C - USB IP version is 3.10a (bootloader) [ 6804] I - Enable USB Interrupt! (bootloader) [ 7149] I - *****fastboot_notify connected**** (bootloader) [ 24048] I - cmd: oem logdump (bootloader) ************************************************************ (bootloader) *** (bootloader) ============================== (bootloader) All Boot Logs have been dumped OKAY [ 3.349s] Finished. Total time: 3.349s